Arcadian Blog
Difference between Part # RDA698/2700SSM and RDA698/2700-1-SSM
Posted by Michael Crudele on
Q) What is the difference between part numbers RDA698/2700SSM and RDA698/2700-1-SSM? A) Firstly, I want to pose a question. Will you need to pass any carrier certification testing for your device? If you do need a certification, it leads me to the main difference between the two antennas. Part # RDA698/2700SSM does not have a high enough “efficiency” to pass the testing that AT&T, Verizon, or Sprint require. On the other hand, part # RDA698/2700-1-SSM is recommended if you plan on receiving a carrier certification. This antenna costs a bit more but will easily pass the carrier test for...
Antenna that Works with BCD996XT Scanner
Posted by Michael Crudele on
Recently, we had a client reach out to us about part # WPD136M6C-001 in regards to setting up a BCD996XT scanner. They were looking to see if that specific antenna could be used with a base magnet or a bracket? Firstly, I’d like to start off by explaining that BCD996XT is capable of scanning a range of frequencies from 2 MHz to 1300 MHz (see below). Unfortunately, our antenna part WPD136M6C-001 only covers the VHF (136-174 MHz), UHF (380-520 MHz), and P25 (760-870 MHz), so depending on what channels you are looking to monitor, this may – or may not-...
- 0 comment
- Tags: Antenna, Antenna Mount, BCD996XT, BNC-Male, IP66, Magnetic Mount, Multi-Band, NMO Mount, P25, UHF, VHF, WPD136M6C-001
Times-7 Universal Mounting Plate
Posted by Michael Crudele on
Recently, a client reached out to us to question whether or not we sell/ stock the Times-7 Universal Mounting Plate 71757 for A5010 and A5020’s. Fortunately, we do offer the Times-7 mounting plate 71757, but we aren’t currently promoting the product. Customers have informed us that they prefer NOT to use adhesive mounts for Times-7 antennas, therefore we’d like to suggest the proper mounting plates and bracket combinations... A5010-60003: IP67 rated circularly polarized panel antenna that measures in at 10 x 10 inches. It offers 8.5 dBic, excellent aesthetics, and an FCC frequency of 902-928 MHz. It has a fixed side...
- 0 comment
- Tags: Antenna, Antenna Mount, ATLAS, Circularly Polarized, ETSI, FCC, IP67, Mounting Bracket, Permanent Mount, SlimLine, SMA-Female, Times-7, UHF, Ultra-Low-Profile, VESA Mount
10” Antenna for EU Use
Posted by Michael Crudele on
Recently, a client approached us about a 10” antenna that could be used in the EU area, so we have a few suggestions… 10 x 10-inch Flush Mount, R8658-LPF-SSF: A circularly polarized ETSI outdoor RFID antenna from RFMAX that measures in at 10 x 10 inches. It operates at 8.5 dBic and is one of the best choices for a low profile, IP67 rated passive UHF RFID application in the ETSI band of 865-868 MHz. Due to its high IP rating, and it can be used outdoors without much of a problem! It comes with a standard SMA-Female connector...
- 0 comment
- Tags: Antenna, Antenna Mount, Circularly Polarized, ETSI, EU, Flush Mount, IP67, Low Profile, Outdoor, RFID, RFMAX, SMA-Female, UHF, VESA Mount, VHF
Will the Times-7 A1115 read normal far-field UHF tags?
Posted by Michael Crudele on
Q) Will the Times-7 part # A1115 read normal far-field UHF tags or do I need some kind of special near-field tag? A) Recently, we were approached with a question about the Times-7 A1115 reader. The client wanted to know if Times-7 part # A1115 would read a normal far-field tag. First off, I’d like to start off by saying that there aren’t special tags for near-field or far-field UHF RFID antennas. All passive tags can be read by all RFID readers/antennas – that includes far and near field antennas. Therefore, to answer your question, the Times-7...
Comparable Model to GPSMB502 in White
Posted by Michael Crudele on
Recently a client contacted us about purchasing an antenna similar to part # GPSMB502 from Arcadian Inc. They wanted the antenna in white and wanted any recommendations we could give. We recommend the RFMAX part # RBDM-G44WW-17-SSSRR-W. The RFMAX part # RBDM-G44WW-17-SSSRR-W is a compact, low profile, ultra-rugged direct mount antenna that’s designed for a machine-to-machine application. It’s a 5-in-1 brick that is designed for outdoor and indoor use with 1 x GPS, 2 x cellular, and 2 x Wi-Fi elements. The antenna is easy to install and 100% vandal-proof. Note: This antenna is a 5-in-1’s, but you can simply trim...
- 0 comment
- Tags: 3G/4G/LTE, Antenna, Antenna Mount, Cellular, Direct Mount, GPS, Low Profile, MIMO, Multi-Band, RFMAX, Ultra-Rugged, Vehicular, WiFi