Need help choosing an antenna? Need to design a custom antenna? WE CAN HELP: techsupport@arcadianinc.com

Arcadian Blog — N-Female

Antenna Similar to TRA806/17103P that Supports 4G LTE and Wi-Fi

Posted by Michael Crudele on

 We received this question recently: Do you have an antenna similar to the “salt shaker” that we currently buy (TRA806/17103P), but will support4G LTE and Wi-Fi?

Continue Reading...

Read more →

Will the FM2 bracket work for the Laird OD9 series?

Posted by Michael Crudele on

Unfortunately, the FM2 will not work with the OD9 series antennas from Laird, however, the OD9 series ship with a dual U-bolt mounting system. It a very basic mount but it works fine and we don’t have any other mounts to work with this system. If you are willing to expand your antenna search beyond the OD9 series to all small antennas that work in the 900 MHz range, we have two recommendations found below.   ROSA-900-SNF: An RFMAX outdoor rated 900 MHZ omnidirectional stick antenna with N-Female connectors for IoT use in the US 902-928 MHz bands. The antenna...

Read more →

Cellular Antenna to be mounted at Side of Building with 25 foot Extension Cables

Posted by Michael Crudele on

We recently had a client reach out to us about a cellular antenna that he wanted to place on the side of his building. He noticed that we had a vehicular antenna, part 170653-000, and wanted something similar to that product. He also informed us that he was looking for a 25-foot cable extension and wanted to receive some recommendations.   Considering part # 170653-000 is a dual cellular product and our assumption that your main concern is to have an antenna outside, we recommend 2 pcs of the Cradlepoint outdoor omnidirectional antenna # 170668-000. Part # 170668-000 is a...

Read more →

Antenna Similar to Alien’s ALR8696-C

Posted by Michael Crudele on

Recently a client approached us about the Alien part # ALR8696-C. They were developing new software and need an antenna that utilized LHCP (left-hand circular polarization), which part # ALR8696-C does not. In response, I have come up with two suggestions, both of which come in LH and RH circular polarizations.   Suggestion 1 RCPL-902-09-SNF: This antenna measures in at 10 x 10 inches and features a gain of 9 dBic, a fixed N-Female connector, and an IP rating of 67.   Suggestion 2 RCPL-902-8-RTM-8: This antenna is the industry standard for passive UHF VHF RFID installations. It measures in...

Read more →

Laird IP67 rated RFID Antenna

Posted by Michael Crudele on

We have four suggestions for those of you looking for a Laird IP67 rated RFID antenna listed below…   Laird # PAR90209H-FNF: Right hand circularly polarized RFID antenna that measures in at 10 x 10 inches. It operates on the ISM band of 902-928 MHz and is fixed with an N-Female connector. This Laird part includes four mounting studs spaced at 63.5 mm and requires an appropriate heavy-duty mount, known as HDMNT-100MM. Laird # PAL90209H-FNF: Left hand circularly polarized RFID antenna that measures in at 10 x 10 inches. It operates on the ISM band of 902-928 MHz and is...

Read more →

Antenna with Similar Characteristics to MTI # MT-263005/N

Posted by Michael Crudele on

Do we have antennas similar to MTI’s part # MT-263005/N? Yes, we do!   We offer two equivalent antennas listed below…   Laird Connectivity # PA9-12: This Laird part is similar in size and offers 12 dBic. It’s a flat panel directional antenna that offers high-gain in a thin, low-profile package. It is linear polarized and operates on the ISM band of 902-928 MHz MTI # MT-263006/N: This MTI part is also similar in size and offers 12 dBic. It’s a linear polarized directional antenna that operates on the ISM band of 902-928 MHz. To keep updated with our promos...

Read more →