External Antenna For Zebra VC5090 Mobile Computers with Mag Mount. NEW DESIGN & LOW PRICE!

VC5090 antenna range extender kit

More Views

External Antenna For Zebra VC5090 Mobile Computers with Mag Mount. NEW DESIGN & LOW PRICE!


Availability: Limited Stock Available

Regular Price: $99.00

Your Price $60.00

  • Buy 10 for $50.00 each and save 17%
  • Buy 25 for $45.00 each and save 25%
High Volume Opportunity? Request a Price Match
RFMAX VC5090 External Antenna Kit - NEW DESIGN & LOWER PRICE!!! This VC5090 WiFi Range Extender Kit is a one-piece Antenna & Magnetic Mount combo for Zebra VC5090 or VH10 rugged Vehicle-Mounted Mobile Computers. These external Forklift antennas boost the range of your VH10 or VC5090's Wi-Fi connectivity by allowing you to install the antenna on top of your forklift eliminating any interference caused by the overhead guard. Kit includes a dual-band 2.4/5 GHz antenna, magnetic mount, cable and connector. During installation, you *MUST* set your computer's settings to default to the external antenna.



New Design & Lower Price!!! RFMAX External Antenna Kits for the Zebra VC5090 or VH10 Rugged Mobile Computers provide a significant boost of Wi-Fi connectivity to your WLAN. This kit is typically used mounted on top of a Forklift, or truck-mounted to connect your VC5090 or VH10 to the wireless network in the warehouse or distribution center.

The antenna operates at both 2.4 and 5.0 GHz with a gain of 4.5/5.5 dBi for 802.11 A,B,G,N. The ONE-PIECE antenna & magnetic NMO mount features a powerful magnet designed to mount outside the vehicle cabin or roll cage for maximum performance. During installation, you *MUST* set your computer's settings to default to the external antenna.

Additional Information

Additional Information

SKU VC50902450GHZ
Mfg Part Number VC50902450GHZ
Manufacturer RFMAX
Product Condition New
Antenna Category 2.4 and 5.0 GHz WIFI / WLAN
Polarity Vertical
Bands Multi
Directional or Omni Omnidirectional
Frequency 1 2.4 - 2.5 GHz
Gain1 4.5 dBi
Frequency 2 4.9 - 5.9 GHz
Gain 2 5.5 dBi
VSWR: < X: 1 2.0:1
Height/Length (inches) 2.5
Mount Style 3/4" NMO High Frequency
Color Black
Connector Type Cable - Side Entry
Cable Type RG-58
Number of Cables 1
Cable Length (inches) 12 feet
Connector RP SMA-Male
Includes antenna, mag mount, cable and connector
OK for Outdoor Use Yes
Vehicular Yes
Ground Plane Required Yes

Customer Reviews 1 item(s)

VC5090 antenna kit greatly improves range
I've seen Motorola Zebra recommend the WTS2450-RPSMA antenna for use on the external antenna port of the VC5090, and repeatedly users get very little to no performance improvement. Why? Because when the VC5090, VC70, MH10 or any other mobile PC is used on a forklift, the roof, or overhead guard acts as a "Faraday Cage" trapping the wireless signal inside or severely distorting it. Installing a WTS2450-RPSMA antenna does not solve that problem. However, if you use an antenna kit that installs ABOVE the overhead guard, that eliminates all interference, and provides the antenna with a clear path to the WAP / wireless access point.

I have seen this VC5090 range extender antenna kit used SUCCESSFULLY for many years. The kit is comprised of an indoor / outdoor rated, high-powered antenna (for both 2.4 & 5 Ghz) a magnetic mounting base, a 12 foot coaxial cable and an RPSMA connector. When using this, or any other external antenna, it is critical that you configure your unit to "persistent" external antenna settings, or else when you re-start the unit, it will default back to using the internal antenna, thus nullifying the gains you achieve with the external antenna kit.

GIve it a try, and I think you'll agree it greatly improves the range of your VC5090 mobile PC.
Overall Satisfaction
Review by Mike / (Posted on 8/22/2015)