Heavy-Duty Antenna Mount for Zebra AN480, AN440, Impinj IPJ-A1000, IPJ-A1001. Also for MIST AP41, AP43, AP61. | HDMNT-150MM
HDMNT-150MM
Shipping calculated at checkout.
Heavy-Duty Antenna Mount for Zebra AN480, AN440, Impinj IPJ-A1000, IPJ-A1001. Also for MIST AP41, AP43, AP61. | HDMNT-150MM
More InfoDocumentsSpecifications ReviewsThe HDMNT-150MM universal antenna mounting solution from RFMAX is THE ONE AND ONLY heavy-duty mounting bracket designed to mount panel antennas from Zebra, Impinj or MIST / Juniper. The unit easily articulates in both the vertical and horizontal plane and is appropriate for indoor or outdoor mounting of any device up to 40 lbs. The HDMNT-150MM comes with hardware to accommodate mounting to a wall, uni-strut or pole with diameter of 1-3 inches. You can also use "hose clamps" or "worm gear clamps" to attach the mount to a pole or bollard up to 12 inches in diameter.
- This heavy-duty, die-cast bracket was specifically designed for the following antenna models:
- Zebra RFID Antennas AN440, AN480, AN610*, AN620* (*AN610 requires mounting plate # 71631, AN620 requires mounting plate # 71632)
- This mount REPLACES Zebra BRKT-70661-01R and BRKT-70662-01R
- Impinj RFID Antennas IPJ-A1000, IPJ-A1001, IPJ-A1000-EU1, IPJ-A1001-EU1
- MIST / Juniper 4x4 MiMo Antenna # PDQ24518-MI1, PDM24518-AZ2 (for AP41, AP43, AP61 access points)
- Invengo's XC-AF26
- Hi-Volume Project Pricing Available!
More Information
Specifications
SKU | HDMNT150MM |
---|---|
Manufacturer Part Number | HDMNT-150MM |
Manufacturer | RFMAX |
Antenna Category | RFID (865-928 MHz) |
IP Rating | IP67 |
Horizontal/Azimuth Beamwidth | 180 |
Vertical/Elevation Beamwidth | 180 |
Height/Length (mm) | 150 |
Thickness/Diameter (mm) | 150 |
Width (mm) | 150 |
Material | Die Cast Aluminum |
Mount Style | Wall, Pole, Uni-Strut, or Bollard |
Includes | Antenna Mounting Plate for devices up to 40 lbs. |
Product Condition | New |